Welbilt FQ80 Operation Manual page 27

DISPLAY
SETUP COMPLETE
□ CLEAN
SETUP COMPLETE
□ QUICK FILTER SETTINGS
□ INTIAL DELAY TIME
SETUP COMPLETE
□ SKIPPED DELAY TIME
59. Press the smaller √ (check) button inside the SETUP
COMPLETE box.
60. Press the Down button.
61. Press the Clean button. Choose HOT (Boil Out) or COLD
(Cold Soak).
62. Press the smaller √ (check) button inside the SETUP
COMPLETE box.
63. Press the QUICK FILTER SETTINGS button.
64. Press the Initial Delay Time button.
65. Press the minute's box to adjust the initial delay time.
The initial delay time is the time the fryer sits idle, after
filter after or filter cooks have been completed, before
prompting for a filter. (Default is two (2) minutes.)
66. Using the keypad to enter the time in minutes.
67. Press the √ (check) button.
68. Press the √ (check) button.
69. Press the smaller √ (check) button inside the SETUP
COMPLETE box.
70. Press the Skipped Delay Time button.
71. Press the minute's box to adjust the skipped delay time.
The skipped delay time is the time after the initial filter is
skipped before it prompts again to filter. The first time
the filter is skipped the filter button turns from white to
yellow. The next time the filter is skipped, the filter
button turns from yellow to red until the filter is
performed. (Default is five (5) minutes.)
72. Using the keypad enter the time in minutes.
73. Press the √ (check) button.
1-18
ACTION