Welbilt FQ80 Operation Manual page 57

DISPLAY
ALERT DRAIN CLOSING REMOVE
TOOLS
FILLING
MEASURING OIL QUALITY
CONNECT FRONT WASH DOWN
HOSE AND PULL HANDLE TO
START RINSING
OPEN DISPOSE VALVE
9. Ensure that all tools are removed from the frypot prior to the
drain closing to prevent damage to the drain. Skip to step 12
for units without OQS.
Keep all items out of drains. Closing actuators may
cause damage or injury.
10. No action required while OQS sensor is filled.
11. No action required while the OQS sensor calculates the oil
quality value of the oil.
12. Connect the front wash down hose to the quick disconnect of
the fryer, by pulling back on the female end collar and pushing
firmly onto the male disconnect. Once in place, release the
disconnect and ensure that the quick disconnect is fully locked
into place. Pull the handle to start rinsing. Press the √ (CHECK)
button.
13. Pull the handle completely forward to start rinsing.
2-6
ACTION
DANGER