Welbilt FQ80 Operation Manual page 18

DISPLAY
□ OIL SYSTEM TYPE
JIB BULK
SETUP COMPLETE RESTART THE
SYSTEM
□ WASTE OIL
DISPOSAL UNIT
BULK
WAND FRONT
WAND EXTERNAL
SETUP COMPLETE RESTART THE
SYSTEM
□ AUTO TOP OFF VAT
ON OFF
□ ATO DELAY TIME
0 MINUTES
SETUP COMPLETE
□ ATO TYPE
AUTO PUSH BUTTON BOTH
21. Press the Down arrow button.
22. Press the Oil System Type button.
23. Select JIB or BULK.
NOTE: A JIB (Jug in a Box) or BIB (Bag in a Box) is a
disposable type oil container. A bulk system has large
storage oil tanks that are connected to the fryer that fills an
onboard reservoir.
24. No action.
25. Press the √ (check) button.
26. Press the Waste Oil button.
27. Select DISPOSAL UNIT , BULK, WAND FRONT or WAND
EXTERNAL .
NOTE: Select DISPOSAL UNIT if disposing oil into an SDU or
other METAL container. Select BULK if disposing oil into a
bulk oil system, which has large storage oil tanks that are
connected to the fryer. Select WAND FRONT if disposing
using a wand connected to the fryer. Select WAND
EXTERNAL if using an external dispose system using a wand
with suction to extract the oil from the frypot.
28. No action.
29. Press the √ (check) button.
30. Press the Auto Top Off Vat button.
31. Select ON unless top off is not desired for this vat.
Default is ON.
32. Press the Down arrow button.
33. Press the ATO Delay time button.
34. Press the time to change the delay time after the top off
oil reservoir has been changed before the system begins
to top off. Press the √ (check) button. The default is 0
minutes for liquid shortening. Enter a value greater than
0 for solid shortening.
35. Press the smaller √ (check) button inside the SETUP
COMPLETE box.
36. Press the ATO Type button.
37. Select AUTO if auto top if auto top off is installed. Select
PUSH BUTTON if only manual top off is installed. Select
1-9
ACTION