Welbilt FQ80 Operation Manual page 64

REMOVE PAN
IS PAN EMPTY?
INSERT FILTER PAN
PUSH BLUE HANDLE
BOIL OUT NOW?
YES NO
SAVING OIL?
IS OIL DISPOSED?
REMOVE FILTER PAN
IS FILTER PAN EMPTY?
INSERT FILTER PAN
13. Carefully pull the filter pan from the fryer.
Open the filter pan slowly to avoid splashing of hot oil
that may cause severe burns, slipping and falling.
14. If the filter pan is empty press the √ (check - YES) button. If
the pan is not empty, press the X (NO) button and return to
step 12.
15. Insert the filter pan.
16. Push the blue valve handle toward the rear of the fryer until it
stops. Disconnect the dispose hose from the fryer.
17. Press the √ (check - YES) button to continue. If the X (NO)
button is selected, the user returns to the filtration menu.
If no pan is detected, the controller displays INSERT PAN until
the pan is detected.
18. Press the √ (check - YES) button if saving the oil and the oil is
to be reused skip to step 20. If the X (NO) button is selected,
continue to next step.
19. If the oil HAS already been disposed and the frypot is empty,
press the √ (check - YES) button and skip to step 20. If the oil
HAS NOT been disposed, press the X (NO) button and skip to
step 25.
20. Carefully pull the filter pan from the fryer.
Remove the filter pan slowly to avoid splashing of hot
oil that may cause severe burns, slipping and falling.
21. If the oil IS NOT being saved, and the filter pan is empty,
press the √ (check - YES) button and skip to step 35. If the oil
IS being saved and the filter pan is empty, press the √ (check -
YES) button and continue to next step. Press the X (NO)
button if oil is in the filter pan and continue to step 23.
22. Push the filter pan fully into place and continue to step 24.
2-13
DANGER
DANGER