Welbilt FQ80 Operation Manual page 33

DISPLAY
ENABLE DISABLE
SETUP COMPLETE
□ OIL DRAGOUT
□ FLOW
SETUP COMPLETE
□ FLOW ADJUST
SETUP COMPLETE
□ BASKET LIFT
SETUP COMPLETE RESTART THE
SYSTEM
□ AIF/ATO TEMP DISPLAY
ENABLE DISABLE
SETUP COMPLETE
□ MENU BOOK
ENABLE DISABLE
SETUP COMPLETE
141. Select enable to enable the temperature button. Select
disable to disable the temperature button and display
constant temperature display.
142. Press the √ (check) button.
143. The Oil Drag out function sets parameters that adjust flow
and flow adjust. These parameters are used to calculate
oil drag out usage for statistical information that is
captured in the Information Statistics function under Oil
statistics.
144. Enter the oil drag out flow rate of pounds per minute
(Default is 2.211) and press the √ (check) button. (Note:
Enter values from 0100-4000 for ranges 0.100-4.000lbs).
145. Press the √ (check) button when complete.
146. Enter the configurable flow rate (Default is 1) and press
the √ (check) button. (Note: Enter values from 10-200 for
ranges 0.10-2.00lbs).
147. Press the √ (check) button when complete.
148. Press the Down button.
149. Press the Basket Lift button.
150. Select ON to enable the basket lift or OFF to disable the
basket lift.
151. Press the √ (check) button.
152. Press the AIF/ATO Temp Display button.
153. Select enable to enable the temperature button. Select
disable to disable the temperature button and display
constant temperature display.
154. Press the √ (check) button when complete.
155. Press the Menu button.
156. Select enable to enable the menu book button on the
bottom of the screens.
157. Press the √ (check) button when complete.
1-24
ACTION