Welbilt FQ80 Operation Manual page 63

ALERT DRAIN CLOSING REMOVE
TOOLS
IS VAT EMPTY?
YES NO
ATTACH THE HOSE TO THE FRONT
ORANGE PORT
PLACE THE WAND IN THE NEXT
FRYPOT
PULL THE BLUE HANDLE TO PUMP
SHORTENING INTO THE NEXT
FRYPOT
FILLING
7. Ensure that all tools are removed from the frypot prior to
the drain closing to prevent damage to the drain.
KEEP ALL ITEMS OUT OF DRAINS. CLOSING ACTUATORS
MAY CAUSE DAMAGE OR INJURY.
8. Once the vat is empty, press the √ (check - YES) button to
continue.
9. Attach the disposal hose to the fryer by pulling back on the
female end collar and pushing firmly onto the male
disconnect. Once in place, release the disconnect and
ensure that the quick disconnect is fully locked into place.
and the other end to the disposal system. Press the √ (check
- YES) button once attached to continue.
10. Place the wand in the frypot following the direction of the
arrow. Press the √ (check - YES) button once the wand is in
the vat.
ENSURE THE WAND IS SECURED AT ALL TIMES TO AVOID
HOT OIL SPLASHING THAT MAY CAUSE DAMAGE OR
INJURY.
11. Pull the handle completely forward to start pumping the
shortening into the adjoining frypot.
12. Hold the wand securely while the vat is filled.
2-12
DANGER
DANGER