Welbilt FQ80 Operation Manual page 31

DISPLAY
SETUP COMPLETE
□ ENERGY SAVINGS
SETUP COMPLETE
□ LANE ASSIGNMENTS
SETUP COMPLETE RESTART THE
SYSTEM
□ BRIGHTNESS
112. Press the √ (check) button.
113. Press the √ (check) button inside the SETUP COMPLETE
box.
114. Press the Back button two (2) times.
115. Press the Energy Savings button. The Energy Savings
option is used during idle periods to lower the frypot
temperature to save energy.
116. Press the Enable button to toggle the Energy Saving
option on or off.
117. Press the Set Back Temp button to change the setpoint of
the Energy Saving option. Use the number pad to enter
the Energy Saving setpoint temperature and press the √
(check) button.
118. Press the Idle Time button to change the amount of time
in minutes the vat sits idle before automatically entering
the Energy Saving mode. Use the number pad to enter the
Energy Saving setpoint temperature and press the √
(check) button.
119. Press the √ (check) button.
120. Press the smaller √ (check) button inside the SETUP
COMPLETE box.
121. Press the Lane Assignments button. This is used to set
the number of baskets per vat.
122. Press the 1 button to have a single lane available (12
products per vat); or 2 button to have 2 lanes or 12
products per vat (6 per lane) available; or 3 button to have
3 lanes or 9 products per vat (3 per lane) available; or 4
button to have 4 lanes or 12 products per vat (3 per lane)
available.
123. Press the √ (check) button.
124. Press the Brightness button. This is used to set the
brightness of the screen. Use the up down arrows to
adjust. (Default is 100.)
125. Press the √ (check) button.
1-22
ACTION