Oracle X5-2 Installation Manual page 105

1. Ensure that the server is in Standby power mode.
When the server is in Standby power mode, the Power/OK status indicator (LED) on the
server front panel flashes slowly. For indicator location, see
Connectors, and Drives" on page
2. Log in to the Oracle ILOM web interface.
For instructions, see
Connection" on page
The Summary Information screen appears.
3. Ensure that full power is off and the server is in Standby power mode.
The Power State field in the Actions panel indicates the server power state.
4. In the Actions panel, click the Oracle System Assistant Launch button.
If the server is powered on, you will be prompted to shut it down.
Note -
5.
To run the Oracle ILOM Remote System Console Plus, click Yes.
Launch Oracle System Assistant Using the Oracle ILOM Web Interface
29.
"Log In to Oracle ILOM Using a Remote Ethernet
85.
Setting Up Software and Firmware Using Oracle System Assistant
"Front Panel Status Indicators,
105