Oracle X5-2 Installation Manual page 148

Configure the Preinstalled Oracle VM Server
To reset the server, use one of the following methods:
■
■
■
The server begins the boot process.
3. Start the remote host console using one of the following methods.
From the Oracle ILOM web interface, select Remote Control → Redirection, and then
■
click the Launch Remote Console button to launch video console redirection.
From the Oracle ILOM CLI, type:
■
-> start /HOST/console
When prompted, type y to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.
GNU GRUB version 0.97 (615K lower / 1957644K upper memory)
Oracle VM Server-ovs (xen-4.3.0 3.8.13-26.4.2.e16uek.x86_64)
Oracle VM Server-ovs serial console (xen-4.3.0 3.8.13-26.4.2.e16uek.x86_64)
4. To pause at the GRUB menu, press a key other than Enter; otherwise, in five
seconds the highlighted installation option will be used.
5. From the GRUB menu, use the up and down arrow keys to select the display
option, and then press Enter. Options include one for default booting, and one
for serial console enabled booting.
148 Oracle Server X5-2 Installation Guide • January 2021
-> start /System
When prompted, enter y to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
From the Oracle ILOM web interface, select Host Management → Power Control,
and then select Reset from the Select Action list box. Click Save, and then click OK.
From the Oracle ILOM CLI, type:
-> reset /System
When prompted, enter y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System