Oracle X5-2 Installation Manual page 62

Install the Cable Management Arm
b. Gently tug on the left side of the front slide bar to verify that connector A is
properly seated.
Number
1
2
8. To install the CMA's connector B into the right slide-rail:
a. Insert the CMA's connector B into the front slot on the right slide-rail until it
locks into place with an audible click [frames 1 and 2].
The connector B tab (callout 1) goes into the slide-rail front slot (callout 2).
62 Oracle Server X5-2 Installation Guide • January 2021
Description
Connector A tab
Left slide-rail front slot