Oracle X5-2 Installation Manual page 142

Configure the Preinstalled Oracle Linux Operating System
■
■
The server begins the boot process.
Start the remote host console using one of the following methods.
3.
From the Oracle ILOM web interface, select Remote Control → Redirection, and then
■
click the Launch Remote Console button to launch video console redirection.
From the Oracle ILOM CLI, type the following command at the CLI prompt:
■
-> start /HOST/console
When prompted, type y to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears. From the GRUB menu, you can choose
whether to use the Oracle Linux Server Unbreakable Enterprise Kernel or a Red Hat compatible
kernel.
GNU GRUB version 0.97 (640K lower / 1703968K upper memory)
Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-16.2.1.e16uek.x86_64)
Oracle Linux Server Red Hat Compatible Kernel (2.6.32-431.e16.x86_64)
4. To pause at the GRUB menu, press a key other than Enter; otherwise, in five
seconds the highlighted installation option will be used.
5. From the GRUB menu, use the up and down arrow keys to select an installation
option, and then press Enter.
Unbreakable Enterprise Kernel. For example:
■
Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-16.2.1.el6uek.
x86_64)
Red Hat Compatible Kernel. For example:
■
142 Oracle Server X5-2 Installation Guide • January 2021
From the Oracle ILOM web interface, select Host Management → Power Control,
and then select Reset from the Select Action list box. Click Save, and then click OK.
From the Oracle ILOM CLI, type the following command from the prompt:
-> reset /System
When prompted, type y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System