HMS Netbiter EasyConnect Series User Manual page 48

Local Configuration
9.5.6 Modem Settings (Netbiter EC350 only)
Important! ‐ There is no support in the Netbiter EC350 for using a PIN code on the SIM
card. For a SIM card with an active PIN code, the code must first be deactivated by inserting
the card into a mobile phone and performing the operation there. The PIN code cannot be
deactivated in the Netbiter EC350.
Enable data connection on modem (Use modem for Argos connection)
Sets the modem to be used for communication as default as long as there is a good mobile
signal. If the WAN interface is also enabled, the gateway will automatically switch to Ether‐
net communication if mobile communication is interrupted.
APN (Access Point Name)
This is the identifying name used to connect to a mobile network. The network operator for
the SIM card can supply this information.
User name / Password
Required by some mobile network operators.
Click Save settings to save changes.
Signal Quality, Modem Connection, Radio Access Technology
These sections provide information about the modem's current connection.
Netbiter EasyConnect Gateway User Manual
46
Doc: HMSI-168-92 Rev: 3.00