Netbiter Ec350 - HMS Netbiter EasyConnect Series User Manual

LED Indicators
3.5 Netbiter EC350
When power is applied all the LED indicators will be lit while the gateway is starting up.
After the startup sequence has completed they will indicate system status.
Pressing the MODE button will temporarily change the function of the top 5 LED indicators
to show the strength of the mobile network signal. After 60 seconds the LED indicators will
revert to indicating system status.
3.5.1 Signal strength (press and release MODE button)
Indication
1 red LED (flashing)
1 orange LED (flashing)
1 green LED (flashing)
2–5 green LEDs (flashing)
Netbiter EasyConnect Gateway User Manual
Meaning
No signal, or unknown signal
Poor mobile network signal
• Check that the antenna is correctly installed and pointing upwards.
• Use an external antenna. Try different antenna placements to get an optimal signal.
Acceptable mobile signal
Good to optimum mobile signal
24
Doc: HMSI-168-92 Rev: 3.00