HMS Netbiter EasyConnect Series User Manual page 43

Local Configuration
9.4.3 GPRS/Ethernet Failover Settings
Connection Mode
Connection mode
GPRS only
Ethernet failover to GPRS
Ethernet only
Connection Time Before Restore to Ethernet
Sets the time before the gateway should retry the Ethernet connection after a failover to
GPRS. The cycle will be repeated until Ethernet communication has been reestablished.
Access Point Name (APN)
The identifying name used to connect to a mobile network. The network operator for the
SIM card can supply this information.
User name / Password
Required by some mobile network operators.
Click Save settings to save changes.
Netbiter EasyConnect Gateway User Manual
Explanation
Ethernet disabled (default mode)
The unit will automatically switch to GPRS if Ethernet connection is lost.
GPRS modem disabled
41
Doc: HMSI-168-92 Rev: 3.00