Table of Contents
Advertisement
(so called 'handshake'). Select Screen adjust if size of displayed screen is bit to large or too small for the
connected screen.
6.4 Audio
In this menu you can setup the correct audio output settings if you like to use Dolby® Digital audio.
Touch sounds:
HDMI audio:
SPDIF audio:
Digital audio:
6.5 Language
Select the OSD language for the menus.
6.6 General
This menu allows you to change the name of your IP receiver, set Auto Standby mode and change
the system password.
6.6.1 Name IP box
This menu item allows you to change the name of your Android receiver to what you want it to be
recognized as by IP functions.
6.6.2 Auto Standby
Auto Standby helps you reducing power consumption. When set to 30 Min/1 Hour/2 Hours up to 6
Hours, the receiver will switch to standby if it doesn't receive any commands during this time. Set
Auto Standby to Off to deactivate the automatic standby function.
6.6.3 System Password
For changing the Default PIN code 1234 to another, first enter the currently used PIN and then enter
the new PIN 2x times.
6.7 Info (About)
Select this menu to see technical details of the receiver as model name, software version, Wi-Fi MAC
address, Ethernet MAC address, IP address and serial number. You can also find options to upgrade
the software and to restore ALL settings back to Factory default.
6.7.1 Upgrade
From time to time you can check if there is an improved software version available. This can be
checked and downloaded from our website www.strong.tv. Enter the type number into the service
support on our website. If there is an improved software version you can download the file and copy
Select On to hear a click when pressing a button on the remote control as
confirmation. Select Off for no click sound.
Select On if you connect to a digital amplifier by HDMI cable to support
Dolby® Digital and Dolby® Digital Plus.
Select On if you connect to a digital amplifier with an optical cable to support
Dolby® Digital.
The selection RAW data sends Dolby audio to outputs depending on the
above settings. The selection PCM only provides Stereo sound to all outputs.
15
Advertisement
Table of Contents
