Mitsubishi Electric MR-E A Series Instruction Manual page 77

3. SIGNALS AND WIRING
(2) Inserting the cable into the connector
(a) Applicable flat-blade screwdriver dimensions
Always use the screwdriver shown here to do the work.
www.DataSheet4U.com
(b) When using the flat-blade screwdriver - part 1
(R0.3)
(22)
(R0.3)
1) Insert the screwdriver into the square hole.
Insert it along the top of the square hole to insert it smoothly.
2) If inserted properly, the screwdriver is held.
3) With the screwdriver held, insert the cable in the direction
of arrow. (Insert the cable as far as it will go.)
4) Releasing the screwdriver connects the cable.
3 - 46
[Unit: mm]
3