Chapter 5 Troubleshooting; The Display Isn't Turning On - SMART Board SBID-MX055-V3N-PW Installation And Maintenance Manual

Chapter 5 Troubleshooting

The display isn't turning on

The screen is blank or there's a problem with the image on the screen
There's no sound or there's a problem with the sound
Touch isn't working as expected
The pens and erasers aren't working as expected
iQ apps aren't working as expected
SMART software on connected computers isn't working as expected
The SMART OPS PC module isn't working as expected
The Intel Compute Card isn't working as expected
Contacting your reseller for additional support
This section explains how to resolve a variety of common issues with the display. If your specific
symptoms aren't covered below or the solutions to the symptoms don't work, refer to the SMART
knowledge base for additional troubleshooting information
community.smarttech.com/s/topic/0TO0P000000Xt5yWAC/mx-series
The display isn't turning on
Symptom
The power light isn't lit.
The power light is lit, but the screen is
blank.
smarttech.com/kb/171555
Troubleshooting steps
Make sure the power cable is securely fastened to the power outlet and the display.
l
Note
If the power cable is connected to a power bar, make sure the power bar is
securely fastened to the power outlet and turned on.
Make sure the switch beside the AC power inlet is in the ON (I) position.
l
Make sure the power outlet is working by testing it with a different device.
l
Make sure the power cable is working by testing it with a different device.
l
Press the Power button on the front of the display or on the remote control.
l
Restart the display.
l
See Turning off, turning on, and resetting the display on page 54.
Determine if the problem is with the video.
l
67
68
71
72
73
73
74
74
74
74
67