SMART Board SBID-MX055-V3N-PW Installation And Maintenance Manual page 85

Appendix A Adjusting iQ settings
Option
Advanced HDMI Settings
Go to the Input Lobby
when there is no signal
Audio
Audio In
These options are available for SMART Board 6000S (V3) models only.
Volume
Built-in microphone
Noise suppression
Audio Out
Volume
smarttech.com/kb/171555
Values Function
HDMI 1.0 Sets the HDMI version, HDP pulse
width, and MHL setup delay for each
HDMI 2.0
HDMI input.
HDMI 3.0
OPS
VGA
On When enabled, show the input
previews when there is no signal.
Off
Range slider Sets the microphone's volume.
On Enables or disables the display's
built-in microphone. The default is
Off
on.
On Enables or disables the noise
suppression filter for the display's
Off
built-in microphone. The default is
on.
Range slider Sets the volume from the speakers
Notes User or system
setting
You can also System
enable or disable
strictly
conformant
HDMI Input
DDC SDA timing
and forbid or
allow HDCP 2.2
with older
receivers.
This option is not
available for
SMART Board
MX series
displays.
This option is not System
available for
SMART Board
MX series
displays.
[N/A] System
[N/A] System
Enable the noise System
suppression filter
to reduce
background
noise when using
the display's
built-in
microphone.
This option is not System
available for
SMART Board
MX series
displays.
85