SMART Board SBID-MX055-V3N-PW Installation And Maintenance Manual page 59

Chapter 4 Maintaining the display
To remove the display safely, use two or more trained installers.
Warning
Do not attempt to move the display by yourself. The display is very heavy.
l
Do not move the display by connecting a rope or wire to the handles on the back. The display can
l
fall and cause injury and product damage.
Important
Follow any documentation included with the third-party mounting hardware.
To remove the display
1. Turn off connected computers.
2. Turn off the display by pressing and holding the Power button
seconds.
3. Flick the switch on the back of the display to the OFF (O) position.
4. Remove all accessible cables, connectors and antennae.
5. Remove any modules from the accessory slot.
6. Lift the display from its mounting location and insert it into its original shipping box.
Warning
Do not place the display on a sloping or unstable cart, stand or table. The display could fall,
resulting in injury and severe product damage.
Caution
Do not leave the display face up, face down or upside down for an extended period. This could
cause permanent damage to the screen.
7. Remove the mounting brackets.
To transport the display
See Moving the display to the installation site on page 20.
smarttech.com/kb/171555
on the front control panel for four
59