SMART Board SBID-MX055-V3N-PW Installation And Maintenance Manual page 90

Appendix A Adjusting iQ settings
Option
Software Update
Updates Channel
Check for Updates Now
Remote Management
Launch Remote
Management Settings
Remote Management
Enabled
Radix Viso version
About
Board Name
Help
Send Feedback
Board Details
smarttech.com/kb/171555
Values Function
Stable Channel Sets which iQ system software
updates the display receives.
Beta Channel
[N/A] Checks for updates to the system
software.
[N/A] Configure the display's connection
settings with the Radix Viso server.
On Enables or disables Remote
Management on the display.
Off
[N/A] Shows the Radix Viso version.
[N/A] Select a name for your display.
[N/A] Shows the SMART support site for iQ. [N/A]
[N/A] Send feature request to SMART.
[N/A] [N/A]
Notes User or system
setting
When switching System
from the Beta
channel to the
Stable channel, a
factory reset
occurs. See
page 87 for more
information
about factory
reset.
For more
information
about the Beta
Channel, see
Switching to the
Beta channel.
If an update is [N/A]
available, the
text changes to
Apply update
now.
The display must
be connected to
the internet to
check for system
software
updates or a USB
drive with the
system software
update file is
connected to the
display.
This option is only System
enabled when
Remote
Management is
enabled.
[N/A] System
[N/A] System
[N/A] System
[N/A]
[N/A] [N/A]
[N/A] [N/A]
90