Camera Group View In Sequence; Scheme View In Sequence - Speco N64NR48TB User Manual

Live View Introduction

5.2.3 Camera Group View In Sequence

You can start camera group view in sequence if camera group has been created (see 4.2.1 Add Camera Group for details).
① Go to the live view interface and then select a camera window.
② Double click one camera group on the right side of the interface. The cameras in the group will start camera group view one by one in the
selected camera window.
You can also drag the group directly to any preview window. Right click on the group view window and then click "Close Dwell" button to stop the
view.
You can also add camera group in the live view interface. Select "Single Channel Sequences" and then click
to modify the group name and sequence interval. Click

5.2.4 Scheme View In Sequence

Click StartSettingsSystemBasicOutput Settings to go to the interface as shown below.
Area ① displays all the dwell schemes; area ② shows the detailed information of the scheme; area ③ displays all the cameras and groups; area
④ is the tool bar ( : clear button;
"OK" to save the current display mode; other buttons are screen mode buttons).
to delete the group.
: favorite button, click it to pop up a window, enter the display mode name in the window and then click
25
NVR User Manual
to add camera group. Click