Speco N64NR48TB User Manual page 40

PTZ
Press and hold the left button of the mouse on any area of the camera image to zoom in the image; press and hold the right button to zoom out
the image.
Move the cursor of the mouse to the camera image and then slide the scroll wheel of the mouse forward to zoom in the image, slide the scroll
wheel of the mouse backward to zoom out the image.
Preset Setting

Click "Preset" to go to preset operation tab and then click "Add" button to pop up a window as shown below. Select the preset and then enter the
preset name in the window; finally click "OK" button to save the settings. You can add 255 presets for each dome at most.
Adjust the dome's direction and then click "Save Position" to save the current preset position (you can also click another preset in the preset list
and then save the preset position after adjusting the dome's direction); click
delete the selected preset.
You can also go to preset setting interface for preset setting, see 6.2 Preset Setting for details.
Cruise Setting

Click "Cruise" to go to cruise operation tab and then click "Add" button to pop up a window as shown below left. You can add 8 cruises for each
dome at most.
① Enter the cruise name in the "Add Cruise" window and then click "Add preset" to pop up the "Add Preset" window (Before adding preset to
the cruise, please add preset of the dome first).
② In the "Add Preset" window, select the preset name, preset time and preset speed and then click "OK" button.
③ In the "Add Cruise" window, you can click
preset. Click "Add" button to save the cruise.
to reselect the preset, then change the preset time and speed. Click
33
in the preset list to call the preset; click "Delete" button to
NVR User Manual
to delete the