Edit Camera - Speco N64NR48TB User Manual

Camera Management
Manually Add：Click "Manual Add" and then enter the IP address or domain name, port, username and password of the NVR/DVR. Check

the added remote channel number and click "Test" to test the effectiveness of the input information. Then click "OK" button to return to
the previous interface.
Note: Only the local NVR has unoccupied channels, may the IPC of other NVR/DVR in the same local network be added. And the added IPC
supports previewing and recording.

4.1.2 Edit Camera

Click "Edit Camera" in the setup panel to go to the interface as shown below. Click
to edit the camera (see Add camera in 3.1 Startup Wizard for details). Click
Click
header line and then click "Modify IPC Password" to pop up a window (check the IPCs in the window, set the new password and then click "OK"
button; only the online IPCs' passwords can be modified and a batch of IPCs' passwords can be modified at the same time). Click
an online IPC ( or click
stores the upgrade file in the "Device Name" item of the popup window and the upgrade file in the list(you should select the upgrade IPC model in
the window if a batch of IPCs' passwords need to be modified) and then click "Upgrade" button to start upgrading(the IPC will restart automatically
after the upgrade is completed successfully).
The IP cameras with PoE function which are directly connected to the PoE port of the NVR will be displayed automatically in the camera list. Refer
in the "Upgrade" header line and then click "IPC Batch Upgrade" to upgrade a batch of IPCs), select the device which
to view the live image of the camera in the popup window.
to delete the camera. Click
19
NVR User Manual
in the "Operation"
to upgrade