Pppoe Configuration; Ddns Configuration - Speco N64NR48TB User Manual

Device Management
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time data. By media player (like VLC player) which supports
the RTSP real-time stream protocol, you can view the live images synchronously. The default RTSP port is 554 and it can be changed as needed.
(The address format: rtsp://IP address:554/chID=1&streamType=main or rtsp://IP address:554/chID=1&streamType=sub; main indicators main
stream; sub indicators sub stream; chID indicators channel ID).
Examples: ① Enable RTSP and "Anonymous". Then open the VLC player and enter the address (for example:
rtsp://192.168.1.88:554/chID=1&streamType=main) in the network address bar of the VLC player. Then you can view the video of channel 1.
② Enable RTSP and open the VLC player. After that enter the address (for example: rtsp://192.168.1.88:554/chID=1&streamType=sub) in the
network address bar of the VLC player. Then a login box will pop up. Enter the username and password which shall be as the same as the username
and password of API server. Then you can view the video of channel 1.
Note: only some versions may support API server function. Please skip the following instructions if your DVR doesn't support it.
API Server: You can log in the media player which supports the RTSP protocol by the username and password here. Moreover, the third-party can
further develop through API service.
Encryption type: Base64 and MD5 are optional.
Username: admin (it cannot be modified)
Password: Set it as needed.
Tips: The username and password of API Server here cannot be used to log in NVR. It is recommended to set the password of the API server
different from the password of "admin" that is used to log in NVR.

11.1.3 PPPoE Configuration

Click StartSettingsNetworkPPPoE to go to the interface as shown below. Check "Enable" in "PPPoE Settings" and then enter the username
and password obtained from the dealer. Click "Apply" to save the settings.

11.1.4 DDNS Configuration

The DDNS is used to control the dynamic IP address through domain name.Speco Technologies provides free DDNS service with US-based servers. You
can access the NVR easily if the DDNS is enabled and configured. Click StartSettingsNetworkDDNS to go to the interface as shown below. The
default DDNS type will be "specoddns.net". The default domain name will be shown, you can use this for your domain name or enter your own. If invalid
or taken, please select another domain name. Click on test to check if ok. If so, you may now go to [your domain name].specoddns.net with Internet
Explorer and access your recorder remotely.
80
NVR User Manual