Main Functions - Speco N64NR48TB User Manual

EZ Setup & Main Interface
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance,
you can go to the system setup interface by clicking "System" tag.

3.2.3 Main Functions

Camera

The module covers the functions such as Camera Management (see Chapter 4 Camera Management for details), Image Settings (see 5.4 Image
Configuration for details), Motion (see 9.2.1 Motion Configuration for details), and PTZ (see Chapter 6 PTZ for details) and so on.
Record

The module covers the functions such as Encode Parameters and Record Schedule and so on. Please see Chapter 7 Record & Disk Management for
details.
Alarm

The module covers the functions such as Sensor and Motion Alarm Handling and Alarm Out Settings. Please see Chapter 9 Alarm Management
for details.
Disk

The module covers the functions such as Disk Management, Storage Mode and Disk Information and so on. Please see Chapter 7 Record & Disk
Management for details.
Network

The module covers the functions such as TCP/IP, DDNS, Port, E-mail and Network Status and so on. Please see 11.1 Network Configuration for
details.
Account and Authority

The module covers the functions such as Account Management (see 10.1 Account Management for details) and Permission Management (see
10.3 Permission Management for details) and so on.
System

The module covers the functions such as Basic Configuration (see 11.2 Basic Configuration for details), Device Information (see 11.8 View System
Information for details), Log Information (see 11.7 View Log for details) and Configuration File Import & Export (see 11.5 Backup and Restore for
details) and so on.
16
NVR User Manual