Nat Configuration; View Network Status; Basic Configuration; General Configuration - Speco N64NR48TB User Manual

Device Management
To use this function, the NVR shall be connected to a switch supporting 802.1x protocol. The switch can be considered as an authentication system
to identify the device in a local network. If the NVR connected to the network interface of the switch has passed the authentication of the switch, it
can be accessed via the local network.
Protocol type and EAPOL version: Please use the default settings.
User name and password: The user name and password must be the same with the user name and password applied for and registered in the
authentication server.

11.1.8 NAT Configuration

Click StartSettingsNetworkNAT to go to the interface for NAT configuration and check "Enable". Click "Apply" to save the settings and make
note of the QR code number under the QR code. Via Internet Explorer, go to connect.specotech.cloud, input the QR code number, your username
and password to login.
You can also scan the QRCode through mobile client which is installed in the mobile phone or PAD to log in the mobile client instantly.

11.1.9 View Network Status

Click StartSettingsNetworkNetwork Status to view the network status or click
to view network status conveniently.

11.2 Basic Configuration

11.2.1 General Configuration

Click StartSettingsSystemBasicGeneral Settings to go to the following interface. Set the device name, device No., language, video format
and main output. Enable or disable wizard, "Log In Automatically", "Log Out Automatically" (if checked, you can set the wait time), "App Live
Self-Adaption" and "Dwell Automatically" (if checked, you can set the wait time). Click "Apply" to save the settings.
on the tool bar at the bottom of the live view interface
83
NVR User Manual