Tampering; Tripwire - Speco N64NR48TB User Manual

Alarm Management

9.4.6 Tampering

Tampering Configuration:
① Click StartSettingsCamera Smart SettingsTampering to go to the following interface.
② Select the camera and enable the relevant detection as needed.
Scene Change: Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
③ Set the sensitivity of the exception detection.
④ Click "Apply" to save the settings.
⑤ Click "Processing Mode" to go to the alarm handling configuration interface of exception detection.
Exception Alarm Handling Configuration:
① Click StartSettingsAlarm Smart EventException to go to the interface.
② Enable or disable "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The alarm handling setting of exception
detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click "Apply" to save the settings. You can click "Exception Config" to go to the exception detection configuration interface.

9.4.7 Tripwire

Line Crossing Configuration:
Alarms will be triggered if someone or something crosses the pre-defined alarm line.
① Click StartSettingsCamera Smart SettingsTripwire to go to the following interface.
64
NVR User Manual