Front Panel Descriptions; Rear Panel Descriptions; Connections - Speco N64NR48TB User Manual

Introduction
Press and hold the right mouse button for 5 seconds in any interface to switch the output to VGA and the NVR will display the video at the

lowest resolution which the NVR supports

1.3 Front Panel Descriptions

The following descriptions are for reference only.

1.4 Rear Panel Descriptions

To quickly get started, connect the following to your recorder in the following order, please refer to the following figure (N32NRE shown for reference).
1. Connect a monitor to the recorder via VGA or HDMI cable (not included).
2. Connect the included optical mouse into any USB port of the recorder.
3. Connect the power adapter to the recorder and plug power cord into a 120VAC 50/60Hz outlet.
4. Connect recorder to network (optional)
5. Turn on power switch and allow recorder to boot up.

1.5 Connections

Video Connections

Video Output: Supports VGA/HDMI video output. You can connect to monitor through these video output interfaces simultaneously or
independently.
Audio Connections

Audio Input: Connect to microphone, pickup, etc.
Audio Output: Connect to headphone, sound box or other audio output devices.
Name
REC When recording, the light is blue
Net When access to network , the light is blue
Power Power indicator, when connection, the light is blue
Descriptions
4
NVR User Manual