Playback& Backup; Instant Playback; Playback Interface Introduction - Speco N64NR48TB User Manual

Playback & Backup

8.1 Instant Playback

Click on the tool bar at the bottom of the preview camera window to play back the record (click
view interface to set the default playback time). Refer to the picture below. Drag the playback progress bar to change the playback time. You can
also click the right-click menu "Instant Playback" in the camera window and then set the instant playback time to play back the record.

8.2 Playback Interface Introduction

Click on the tool bar at the bottom of the live view interface or click StartPlayback to go to the playback interface as shown below (click
on the tool bar at the bottom of the live view interface to set the default playback time).
On the panel on the right you will see the channel number and the recorded data coded by color. The bar that runs across them represents the
playback time being viewed. You can move this bar around to export, highlight a section of the desired recording, click export and follow the
8 Playback& Backup
46
NVR User Manual
on the tool bar at the bottom of the live