Saving User Settings - Toshiba vlp technology P9 ASD Installation & Operation Manual

Saving User Settings

User
A profile of an existing setup (user-settable parameters) may be saved and re-loaded when required by
using the Save User Settings/Restore User Settings feature or via the Save/Restore Wizard.
Both Save functions are accessed via the Utilities menu.
Save/Restore User Settings
The Save User Settings feature is selection seven (7) of the Program\Utilities\Type Reset menu. This
function saves the user parameter settings to the EEPROM of the ASD. Because this feature is not
available while the ASD is running, the ASD must be stopped to save or restore data using either of these
selections.
The 8:Restore User Settings selection of the Program\Utilities\Type Reset menu restores the saved user
parameters for system operation.
Save/Restore Wizard
The Save/Restore Wizard feature is accessed via Program\Utilities\Save/Restore Wizard. This function
saves the user parameter settings to the SRAM of the EOI and is menu-driven. From the Save/Restore
Wizard dialog box, select either Save User Settings to EOI or Restore User Settings from EOI. The
restore feature is not available or displayed for selection until a profile is saved.
Because the Save/Restore Wizard saves to the EOI, the saved data may be loaded into other systems as
required by installing the loaded EOI and executing the Restore User Settings from EOI.
From the Program\Utilities\Type Reset menu, selections 3:Reset to Factory Settings and 12:Set EOI
Memory to Default will clear the EOI memory of any user-stored information.
Note:
P9 ASD Installation and Operation Manual
See the section titled Battery Backup on pg. 28
function.
for more information on the EOI storage
41