Toshiba vlp technology P9 ASD Installation & Operation Manual page 240

Hide thumbs Also See for vlp technology P9 ASD:

Table of Contents

F911

Output Function Assigned

Program My Function My Function Unit 2

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the Output Function Assigned terminal.

This setting assigns the function of the programmable Output Function

Assigned data location to one of the functions listed in the Input Setting field

Table 9 on pg.

255.

Settings:

0 – 3099

See the My Function Instruction Manual (P/N E6581335) and

information on this parameter.

Input Function Target 1

Program My Function My Function Unit 3

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the programmable Input Function Target 1

terminal.

This setting assigns the function of the programmable Input Function Target 1

terminal to any one of the user-selectable functions listed in

Table 9 on pg.

255, or

Table 11 on pg.

See

F977

for more information on this parameter.

Input Function Command 1

Program My Function My Function Unit 3

This parameter is used to assign a user-selected logical operator to two user-

selected Input Function Target variables, enable a counter/timer function, or

perform a hold/reset function.

Table 12 on pg. 259

lists the available selections. Their use and selection

requirements are described in an example at F977.

Input Function Target 2

Program My Function My Function Unit 3

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the programmable Input Function Target 2

terminal.

This setting assigns the function of the programmable Input Function Target 2

terminal to any one of the user-selectable functions listed in

Table 9 on pg.

255, or

Table 11 on pg.

See

F977

for more information on this parameter.

Input Function Command 2

Program My Function My Function Unit 3

This parameter is used to assign a user-selected logical operator to two user-

selected Input Function Target variables, enable a counter/timer function, or

perform a hold/reset function.

Table 12 on pg. 259

lists the available selections. Their use and selection

requirements are described in an example at F977.

232

F977

Table 8 on pg.

257.

Table 8 on pg.

257.

Direct Access Number — F911