Toshiba vlp technology P9 ASD Installation & Operation Manual page 239

Hide thumbs Also See for vlp technology P9 ASD:

Table of Contents

F906

Input Function Target 1

Program My Function My Function Unit 2

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the programmable Input Function Target 1

terminal.

This setting assigns the function of the programmable Input Function Target 1

terminal to any one of the user-selectable functions listed in

Table 9 on pg.

255, or

Table 11 on pg.

See

F977

for more information on this parameter.

Input Function Command 1

Program My Function My Function Unit 2

This parameter is used to assign a user-selected logical operator to two user-

selected Input Function Target variables, enable a counter/timer function, or

perform a hold/reset function.

Table 12 on pg. 259

lists the available selections. Their use and selection

requirements are described in an example at F977.

Input Function Target 2

Program My Function My Function Unit 2

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the programmable Input Function Target 2

terminal.

This setting assigns the function of the programmable Input Function Target 2

terminal to any one of the user-selectable functions listed in

Table 9 on pg.

255, or

Table 11 on pg.

See

F977

for more information on this parameter.

Input Function Command 2

Program My Function My Function Unit 2

This parameter is used to assign a user-selected logical operator to two user-

selected Input Function Target variables, enable a counter/timer function, or

perform a hold/reset function.

Table 12 on pg. 259

lists the available selections. Their use and selection

requirements are described in an example at F977.

Input Function Target 3

Program My Function My Function Unit 2

This parameter plays a role in the setup of the My Function feature by

selecting the functionality of the programmable Input Function Target 3

terminal.

This setting assigns the function of the programmable Input Function Target 3

terminal to any one of the user-selectable functions listed in

Table 9 on pg.

255, or

Table 11 on pg.

See

F977

for more information on this parameter.

P9 ASD Installation and Operation Manual

Table 8 on pg.

257.

Table 8 on pg.

257.

Table 8 on pg.

257.

Direct Access Number — F906