Toshiba vlp technology P9 ASD Installation & Operation Manual page 59

Past Trip 3 — Past trip information or None.
Past Trip 4 — Past trip information or None.
Note: An improper P9 ASD setup may cause some trips — reset the P9 ASD to the
Factory Default settings before pursuing a systemic malfunction (Program 
Utilities  Type Reset  Reset to Factory Settings).
Direction — Displays the Direction command (forward/reverse).
Discrete Input Terminals — Displays the status (activated = reverse video) of the discrete input
terminals of the Terminal Board.
Discrete Output Terminals — Displays the status (activated = reverse video) of the discrete
output lines of the Terminal Board.
Output Frequency — Displays the running frequency.
Main Monitor Selections
Two (2) Monitor Mode
on the Frequency Command screen while the P9 ASD is running.
Note: VLP Technology Average and Work Hours may also be selected as Main Monitor
items, but are not displayed at the Monitor screen.
The selected items, along with their real-time values, are displayed on the Frequency Command screen
while running. Not all Monitor Mode items are available for display on the Frequency Command
screen. The available items are underlined on
Any two of the underlined items may be selected from the listing at Program Utilities  Main
Monitor Selections. Select an item from the Monitor 1 listing and another item from the Monitor 2
listing to be displayed as shown in
P9 ASD Installation and Opeation Manual
items may be selected from the Main Monitor Selections screen to be displayed
pg. 49
Figure 22 on pg. 32
and pg. 50.
(DC Voltage and Output Current shown).
51