Making Adjustments And Selections - Panasonic PT-CMZ50 Operating Instructions Manual

Making adjustments and selections

It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted.
4)
1) Press the <FOCUS> button to roughly adjust the focus of the projected image. (x page 53)
2) Change the settings of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
installation mode. (x page 32)
f Refer to "Navigating through the menu" (x page 63) for the operation of the menu screen.
3) Press the input selection buttons on the remote control or the <INPUT SELECT> button on the control
panel to select the input signal.
f The buttons that can be used on the remote control are as follows.
<HDMI 1> button, <HDMI 2> button, <DIGITAL LINK> button, <COMPUTER> button, <NETWORK/USB>
button
4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 54)
5) If the input signal is an analog RGB signal, press the <AUTO SETUP> button.
6) Press the <FOCUS> button again to adjust the focus. (x page 53)
Note
f The image size and position may be adjusted with [DIGITAL ZOOM EXTENDER] and [DIGITAL IMAGE SHIFT]. For details, refer to "Using the
Digital Zoom Extender function" (x page 72) in the [POSITION] menu → [SCREEN ADJUSTMENT]. However, the image quality will deteriorate
as the image size is reduced using the Digital Zoom Extender function.
f When the projector is switched on for the first time after purchase, the focus adjustment screen is displayed after the projection starts, followed by
the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT] screen. When the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is
executed, the focus adjustment screen is displayed after the projection starts, followed by the [INITIAL SETTING] screen. When the [NETWORK]
menu → [INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT] screen is displayed after the projection starts next time. For details, refer
to "When the initial setting screen is displayed" (x page 46) and "When the administrator account setting screen is displayed" (x page 48).
50 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector
4)
4)
1) 6)
2)
3)
3)
2)
1) 6)
5)