Panasonic PT-CMZ50 Operating Instructions Manual page 147

[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1 [Auth]
Selects the authentication method specified by your Internet
service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP server.
Contents of E-mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type
Serial No
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME
INTAKE AIR TEMPERATURE
ERROR
INTAKE AIR TEMPERATURE
----- Error information -----
Error Code
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Intake air temperature
Exhaust air temperature
Light temperature1
Light temperature2
PROJECTOR RUNTIME
LIGHT RUNTIME
-------- Current status ---------
MAIN VERSION
SUB VERSION
LIGHT STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
Chapter 5 Operation of Function - Web control function
: PT-CMZ50
: 000000000
at [ 30] minutes interval
Over [ 32 degC / 89 degF ]
[ OFF ]
[ OFF ]
: 27 degC /
: 30 degC /
: 64 degC / 147 degF
: 36 degC / 96 degF
21 H
21 H
0.25
0.90
LIGHT=ON
NETWORK
ON
192.168.0.105
00:38:37:80:33:44
5 [Password]
Enter the password for the POP server or the SMTP server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit]
Updates the settings.
80 degF
86 degF
1
2
3
4
5
6
7
8
ENGLISH - 147