Table of Contents
Advertisement
Attention
f After washing the air filter unit, dry it thoroughly before attaching it back to the projector. Attaching a wet unit will cause an electric shock or
malfunction.
f Do not disassemble the air filter unit.
Note
f Replace the air filter unit with a new optional Replacement Filter Unit (Model No.: ET-RFV500) if it is damaged or if the dirt does not come
off even after washing
Attaching the air filter unit
Tab
1)
Attach the air filter unit to the projector. (Fig. 1)
f Hold the air filter unit with the tab on the left side as shown in the figure, attach it from the right side, and
push the tab until it clicks.
f Take care not to remove the sponge (Fig. 2) on the side of the air filter unit when attaching the air filter unit.
f Do not press on the crease part of the air filter when pressing into place.
2)
Attach the air filter cover to the projector.
f Perform in the reverse order of the Step 2) of "Removing the air filter unit" (x page 158) to close the air
filter cover. Make sure to press the air filter cover firmly until it clicks into place.
f When the air filter unit is attached to the projector, proceed to the "Resetting the air filter counter" (x page 159).
Note
f When using the projector, be sure to attach the air filter unit. If it is not attached, the projector will suck in dirt and dust causing a malfunction.
Resetting the air filter counter
1)
Turn on the projector.
2)
Press the <MENU> button on the remote control or the control panel.
f The main menu screen is displayed.
3)
Press as to select [PROJECTOR SETUP].
4)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
5)
Press as to select [FILTER COUNTER].
6)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
7)
Press as to select [FILTER COUNTER RESET] and press the <ENTER> button.
8)
When the confirmation screen is displayed, press qw to select [OK], then press the <ENTER> button.
f The [PROJECTOR SETUP] menu → [FILTER COUNTER] → [FILTER COUNTER] is displayed as "0H".
Note
f When the projector is used without resetting the filter counter, the actual filter usage time (counter numeric value) will not be able to be confirmed.
Chapter 6 Maintenance - Maintenance/replacement
Air filter unit
Fig. 1
Sponge
Fig. 2
ENGLISH - 159
Advertisement
Chapters
Table of Contents
