[Shift] - Panasonic PT-CMZ50 Operating Instructions Manual

Initializing adjustments for [GRID ADJUSTMENT]
Initialize the correction data adjusted with [GRID ADJUSTMENT] and restore the factory default settings (the
state where no correction is performed). Simultaneously the settings of [GRID RESOLUTION], [GRID COLOR],
[CONTROL POINTS COLOR], [BACKGROUND PATTERN], and [GRID SHIFT] are restored to the factory default
settings.
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [GRID ADJUSTMENT].
4) Press qw to select [ON].
5) Press the <ENTER> button.
f The [GRID ADJUSTMENT] screen is displayed.
6) Press as to select [INITIALIZE].
7) Press the <ENTER> button.
f The confirmation screen is displayed.
8) Press qw to select [OK], and press the <ENTER> button.

[SHIFT]

Move the image position vertically or horizontally if the image projected on the screen is still out of position even
when the positions of the projector and screen are correct.
1) Press as to select [SHIFT].
2) Press the <ENTER> button.
f The [SHIFT] screen is displayed.
3) Press asqw to adjust the position.
Orientation
Vertical (up and down)
adjustment.
Horizontal (right and left)
adjustment.
Note
f Depending on the input signal, if the adjustment of [SHIFT] exceeds the effective adjustment range of the input signal, the position of the
image cannot be changed. Adjust within the effective adjustment range.
Chapter 4 Settings - [POSITION] menu
Operation
Press the a button.
Press the s button.
Press the w button.
Press the q button.
Adjustment
The image position moves up.
The image position moves down.
The image position moves to the right.
The image position moves to the left.
ENGLISH - 77