Table of Contents
Advertisement
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed
easily.
For details of power cord handling, refer to "Read this first!". (
Attaching the power cord
1)
Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing the power cord
1)
Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2)
Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the
side tabs.
Power indicator
Displays the status of the power. Check the <ON(G)/STANDBY(R)> status of the power indicator before operating
the projector.
Power indicator <ON(G)/STANDBY(R)>
Chapter 3 Basic Operations - Switching on/off the projector
Æ
page 4)
ENGLISH - 33
Advertisement
Chapters
Table of Contents
