Table of Contents
Advertisement
EZ Setup & Main Interface
3
3.1 EZ Setup
The disk icons will be shown on the top of the startup interface. You can view the number and status of each disk
quickly and conveniently through these icons ( : no disk;
You must configure the wizard if you start the NVR for the first time (or click "Skip" to cancel the EZ Setup next time).
The first time you start up your NVR, you shall read the privacy statement. Then choose the language and locality as
needed. After that, you shall configure date and time.
System Time: Set the time and date format of the system
DST: Toggle Daylight Saving Time On or Off
Time format: Choose between 24-hour mode and 12-hour mode.
NTP: Specify an NTP server to synchronize the time (optional).
Click "Next" to continue.
System Login. Set your own password when you use the wizard for the first time; select the login username and
enter the corresponding password next time.
EZ Setup & Main Interface
: unavailable disk;
9
NVR User Manual
: RW available disk).
Advertisement
Table of Contents
