Par 64 Short Q4-18 Table of contents Warning ....................................2 Unpacking Instructions ..............................2 LED Expected Lifespan ..............................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Par 64 Short Q4-18 with a power cable (1,5 m) ● Filter frame ●...
Page 4
● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
The Par 64 Short Q4-18 can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property!
Par 64 Short Q4-18 Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE...
Par 64 Short Q4-18 Description of the device Features The Par 64 Short Q4-18 is an ultra-compact light effect with high output and great effects. It is the ideal solution for small clubs and mobile DJs. ● Power Supply: 100–240 V AC ●...
06) 3-pin DMX signal connector OUT Installation Remove all packing materials from the Par 64 Short Q4-18. Check if all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Par 64 Short Q4-18 Control Modes There are 5 modes: ● Built-in programs ● Auto Run ● Sound-controlled ● Master/Slave ● DMX-512 (4CH, 5CH, 8CH) One Par (Auto Mode and Built-in programs) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
Par 64 Short Q4-18 Multiple Pars (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin XLR cable to connect the Pars and other devices.
Par 64 Short Q4-18 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Par 64 Short Q4-18 The Par 64 Short Q4-18 can be operated with a DMX controller in control mode or without the DMX controller in stand-alone mode. Control Panel A) LED display MODE button C) SETUP button D) UP button DOWN button Fig.
Par 64 Short Q4-18 Main Menu Options Auto DMX address Slave Sound-controlled Built-in programs 1. Auto Run Program 01) Press the MODE button until the display shows 02) The device will run its auto program. 2. DMX Mode In this menu you can set the DMX address.
Page 15
Par 64 Short Q4-18 Red from 000-255 Flash Frequency from 00-99 Red from 000-255 Green from 000-255 Flash Frequency from 00-99 Green from 000-255 Flash Frequency from 00-99 Green from 000-255 Blue from 000-255 Flash Frequency from 00-99 Blue from 000-255...
Par 64 Short Q4-18 8 channels Channel 1 – Dimmer intensity 0–255 Gradual adjustment, from dark to brightest 0–100 % Channel 2 – Red CH7 must be set to 0 0–255 Gradual adjustment Red, from 0–100 % Channel 2 – Macro Colors CH7 must be set between 1–22...
Page 18
Par 64 Short Q4-18 Channel 2 – Program Speed CH7 must be set between 23–252 0–255 Slow to fast Channel 2 – Sound sensitivity CH7 must be set between 253–255 0–255 Audio sensitivity from less sensitive to highly sensitive Channel 3 – Green Dimmer must be open 0–255...
Par 64 Short Q4-18 Maintenance The Par 64 Short Q4-18 requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a soft cloth.
Page 21
Par 64 Short Q4-18 Problem Probable cause(s) Solution • Check if power is switched on and One or more cables are plugged in No power to the fixture fixtures do not function at all Primary fuse blown • Replace the fuse Fixtures reset The controller is not connected.
Par 64 Short Q4-18 Product Specifications Power Supply: 100–240 V AC Peak Power: 245 W Power Consumption: 120 W Light source: 18 x 4-in-1 LEDs Drive Current: 450 mA Refresh rate: 7,8 kHz Dimmer: 0–100 % Strobe: 0–20 Hz Beam Angle: 40°...