A pop-up window showing Activation Success indicates that you have completed the first boot setup, click
OK to enter the diagnostic system and start using the device.
If you meet problems like "Registration failed", please check your network or contact Xtool aftersales services:
supporting@xtooltech.com
3 U
PDATE
3.1. UPDATE SOFTWARE
After activating the device, please update the software in "Update" first. The device will pull all currently
supported software packages from our servers, and you can download them as needed. To access the update
application, open the diagnosis application and click UPGRADE, and it will show as below:
Figure 2-14 Sample of Activation, Screen 2
Figure 2-15 Sample of Activation, Screen 3
& D
ELETE
17