13.5.2
Attaching the Dahl locking plate to the wheelchair
An additional wheelchair-specific adaptation kit is required for moun-
ting the Dahl locking plate. It contains special nuts and plastic spacers
to be fitted inside the battery box.
DAHL Docking Station Installation Kit Locking Plate 503125
(PV art. no.: 000043535) and DAHL adaptation set for DAHL
Docking station 502064 (PV art. no.: 000044508):
① Countersunk screw with Torx TX27 - ISO 14581 M8x35 14.9 (PV
art. no.: 000043534)
② Locking plate with screws for docking station 10069 (PV- Art.-No.:
000020667)
③ 8 mm intermediate piece for locking plate for 10069 DAHL
(PV art. no.: 000010131)
④ DAHL spacer 502071 (PV art. no.: 000044507)
⑤ DAHL nu 500759 (PV-Art.-Nr.: 000044506)
To install the Dahl locking plate, use the DAHL Adaptation kit, article
502064.
>
To mount the adapter set you need a Torx wrench TX 27. Tighten the
Torx screws with a torque of 16-18 Nm.
Loading and transporting the power wheelchair
④
⑤
①
② ③
Fig. 37: Dahl Adaptationkit for Dahl Docking
Station
Fig. 38: Torx TX 27
④
83