Attaching The Dahl Locking Plate To The Wheelchair; Fig. 43: Dahl Adaptionkit For Dahl Docking Station; Fig. 44: Torx Tx 27 - Paravan WHEELCHAIR Series Operating Instructions Manual

Table of Contents

14.7.2

Attaching the Dahl locking plate to the wheelchair

An additional wheelchair-specific adaptation kit is required for the

installation of the Dahl locking plate. It contains special nuts and plastic

spacers to be placed inside the battery box.

DAHL Docking Station installation kit locking plate 503125

(PV art. No.: 000043535) and DAHL adaptation set for DAHL

Docking Station 502064 (PV art. No.: 000044508):

① Countersunk screw with Torx TX27 - ISO 14581 M8x35 14.9

(PV art. No.: 000043534)

② Locking plate with screws for Docking Station 10069

(PV art. No.: 000020667)

③ 8 mm intermediate piece for locking plate for 10069 DAHL

(PV art. No.: 000010131)

④ DAHL spacer 502071 (PV art. No.: 000044507)

⑤ DAHL nut 500759 (PV art. No.: 000044506)

To install the Dahl locking plate, use the DAHL Adaptation kit, article

502064

You need a Torx key TX 27 to install the adapter set. Tighten the Torx

screws with a torque of 16-18 Nm.

④

② ③

Fig. 43: Dahl Adaptionkit for Dahl Docking

Station

Loading and transporting the power wheelchair

⑤

①

④

Table of Contents

Pr 25