Table of Contents
Advertisement
13.5.6
Release from the docking station
>
When the vehicle has been brought to a halt, remove the safety belt.
>
To unlock commence by driving the wheelchair forward to release pressure on the lock pin.
>
Press the red release button in the control panel. The locking pin will be triggered/ released for approx.
5 or 8 seconds, after which the locking pin is automatically locked/activated again.
>
Move the wheelchair away from the docking station within this 5 or 8 second period. Do not attempt to
reverse out of the docking station until the red LED on the control module, which indicates the unlock
position, has been illuminated.
)
Please refer to Dahl Engineerings installation and user guide for height
adjustable VarioDock™ system.
92
WA R N I N G
Attempting to reverse the wheelchair before the red LED has
been illuminated will result in blocking the docking stations
locking mechanism, which makes it impossible to reverse. If
this happens repeat above unlocking procedure.
Loading and transporting the power wheelchair
Advertisement
Table of Contents
