Set The Projection Of The Armrest; Fig. 20: Armrest Projection - Paravan PR 35 User Manual

10.7

Set the projection of the armrest

This work instruction applies to the right and left sides; it is possible that
the rotational direction of the screw connection is reversed!
Proceed as follows to check and set the projection of the armrest:
> Loosen hexagonal cap nut .
> Loosen hexagonal cap nut .
> Move the armrest  into the desired position.
> Hexagonal cap nut  and  tighten approx. 8 Nm.
Settings on the PR 35, mechanical

Fig. 20: Armrest projection

57