22.5
Log of instructions provided upon delivery
Due to the flexible setting options of the PR 35, the following information should be noted:
When using the tilt function:
>
It must be ensured that the seat is not tilted too far forwards or backwards, as otherwise you could slip
out of the seat.
>
The tilt function is set to your weight.
>
Tilt the wheelchair first, then set the backrest.
>
Always wear the seatbelt when using the tilt function.
>
When using the tilt function, only half the speed of the selected movement level is possible.
Seat / backrest in the special orthopaedic seat
>
The backrest must only be adjusted as far as is necessary, as the motor is not powerful enough to lift the
weight of the driver. Use the tilt function first.
>
When adjusting the backrest and the tilting angle, be aware of attachments (backpack, etc.).
158
Annexes and technical documentation