14.2.8
Select drive program, drive
The power wheelchair must be in driving mode.
>
The last selected drive program is shown on the display.
Press the profile key ① to select/switch to one of the 5 movement
levels (profiles).
>
The selected drive profile will appear on the display.
Press the relevant key to select a higher ② or lower ③ maximum end
speed in the respective drive profile.
>
The preference within the drive profile will appear on the display.
Push the joystick in the direction in which you wish to travel.
>
The power wheelchair moves in the selected direction.
① Move forwards
②
Turn to the right
③ Move backwards
④ Turn to the left
)
See section "3 Safety notes"
112
③
Fig. 82: Select drive program
①
④
③
Fig. 83: Joystick travelling direction
①
②
②
Controls