Table of Contents
Advertisement
19.3
Operating the battery disconnect switch
By activating the battery disconnect switch, the installed 2x12 V AGM batte-
ries are disconnected from the power circuit of the wheelchair to ensure safe
transport.
The disconnect switch is located on the right rear part of the chassis below
the panelling. Turning and removing the disconnect key will disconnect the
batteries so that the wheelchair cannot be started up even by pressing the on
switch on the joystick.
Completely fold up the wheelchair and ensure that nothing can be damaged
during transport. Switch off the control unit.
Fig. 97: Battery disconnect switch
Now turn the key 90° and remove it, now no more adjustment can be made.
The chair can now only be pushed by disengaging the mechanical brake on the
motor. After securely lashing the wheelchair, lock the brakes again.
Fig. 98: Battery dicon. switch, inactive
131
Electrical system
Advertisement
Table of Contents
