Table of Contents
Advertisement
The cover must first be removed to attach the Dahl docking station to
the Paravan wheelchair.
>
To remove the cover, loosen the six knurled screws ①. If a main dis-
connect switch is installed on the rear panel, first remove the key of
this switch ②.
>
Remove the rear fairing ③, as well as the side fairings. The order in
which these are removed is not important.
>
To open the cover of the battery box, the two front hexagonal screws
must be removed with a wrench with a width across flats of 10mm.
Afterwards the battery box can be tilted backwards over the hinges -
caution: here the whole weight of the structure rests on the lid!
84
①
Fig. 39: Knurled screws Paravan
③
Fig. 40: Rear and side covers Paravan
Loading and transporting the power wheelchair
②
④
Advertisement
Table of Contents
