11.9
Manual driving, push mode
11.9.1
Operation of the brake lock release lever (emergency release)
>
If you want to push the PR 35, you must set both brake lock release
levers on the left and right drive side to "UNLOCK" (downwards).
L
Do not set to "UNLOCK" on a gradient! In this position, the drive
motor is unable to brake!
Positions of the brake lock release lever
LOCK
>
Lever position upwards = driving; braking system is active!
UNLOCK
>
Lever position downwards = pushing; braking system is deactivated!
CAUTION: During push mode the control unit must be switched off!
70
Fig. 27: Brake lock release lever (emergency
release)
Driving with the PR 35